Pricing
In Stock
Quantity:
Add to cart

K145 Server Software
SKU: OCS-146

Description:

Now its Free! Put your Serial Key in the comments for your order and we will email you a Registration Key (Since it's free we can't provide too much technical support)

Monitor Temperatures over a network using the K145 Server Software. Generate Email Alarms and easily monitor Temperatures in Four Zones with a Web Browser.

Sick of paying a fortune to monitor temperatures in your Server rooms, green houses, or other temperature controlled rooms.

The Ocean Controls K145 Server Software is a budget priced Windows based HTTP, Email and Modbus TCP Server for the K145 4 Channel Temperature Logger. By plugging the K145 4 Channel Temperature Logger into a serial port of a networked PC and then installing the K145 Servor software you are able to provide remote temperature monitoring at a fraction of the price of other solutions.

Use it to monitor:

• Computer Server Room Temperatures
• Greenhouse Temperatures
• Home Temperature from Work
• Any Application where immediate notification of Temperature is required

Main Features:

• Monitor Temperatures in Real Time from anywhere in the world over the Internet, using only a web browser
• Easily see if Temperatures are within Alarm Limits
• Monitor Maximum and Minimum Temperatures
• Sends Emails to three different email addresses when Temperature enters Alarm State and returns to Normal
• View real time and Logged Data using Modbus TCP connection

A web browser can be used to connect to the computer running the K145 Server. A web page containing a table detailing the following is shown for each.

• Name (A tag which is used to describe the sensor )
• Temp (The Current Temperature of the Sensor)
• Min (The Minimum Temperature seen by the sensor)
• Max (The Maximum Temperature seen by the sensor)
• Low (The Low Temperature set point)
• High (The High Temperature set point)
• Hyst (The Difference between the current temperature and the set point required for the alarm state to be entered)
• State (The current state of the sensor).

On your remote PC you can Plot the Temperatures in real time. The latest version of our TempLogger software can be used to connect via the Modbus TCP connection. The TempLogger software can also be used to view Logged Data on the K145Server by downloading the contents of the Modbus Holding Registers in which 989 readings for each of the 4 Temperature Sensor are stored.

The K145 Server software can be downloaded and installed on your PC. It will run as a demo for 15 minutes.

When purchasing, put the serial number (the serial number is linked to the PC you are installing the software on) in the comments and we will email you the registration number.