XMP3-18RT-C PLC and HMI
SKU: PLC-101

Description:

This controller is a clearance item. We will not be restocking this item once stock falls to 0.

The XMP3 series from Xinje is a PLC and a HMI combined into a single unit. It features a large number of functions, large memory capacity, small size and fast scan times. We have been astounded how flexible this unit is and it has been used in many of our projects

Although economically priced, these PLCs have been built and designed with motion control in mind.

The XMP3-18RT has functions to control Stepper and Servo motors using the 2 high speed pulse outputs. The functions require the user to input 4 parameters which are maximum frequency, total output pulse number, add/minus speed for ramping up/down to speed and the Y output number. The pulse output is not affected by the scan cycle.

The XMP3-18RT also has a PWM function for generating pulse width modulation signals.

Features:

• 10 digital Inputs and 8 digital outputs (4 relay contacts and 4 open collector).
• Additional I/O modules can be connected
• Power 20-30VDC
• Two high speed 32 bit counter inputs, the highest frequency is 200K.
• 2 pulse outputs for stepper or servo motor control (0~400K).
• 1 hardware interrupt
• Floating Point Math
• Free Windows Software
• Programmable in Ladder Logic and Instruction List
• RS485 Port to allow I/O expansion using MA Modbus Modules see Part No PLC-500 to PLC-540
• I/O Expansion using a BD card plugged into back

Download Documentation and Free Software

BD I/O Expansion Cards
The PLC has a BD expansion outlet (see panel in picture above) allows one of the following expansion cards to be plugged in

• XP-2AD2PT-BD: 2 Channels 12 Bits analog input (0-5V or 0-10V selectable) and 2 Channels 2 wire PT100 Temperatur
• XP-2PT2AD1DA: 2 Channels 14 Bits analog input (0-5V or 0-10V selectable), 2 Channels 2 wire PT100 Temperature and 1 Channel 10 Bit Analog output (0-20mA or 4-20mA selectable)
  

XCP Software and Programming

The XCP software's edit environment allows the user the choice of programming in Ladder Logic or instruction list programming.

The software is fast and easy to use. It allows for commenting of the variables so the rungs are easy to understand.

It has an online monitor which allows the user to monitor the program on the ladder or open the data window to modify or monitor the data variables.

The XCP software also features a rich instruction list which allow calculations in integer, long integer or floating point. Other instructions include ordinal control, data manipulation, interrupts, communications and motion control.

Copy, cut and paste of instruction and ladder programming allows easy editing of programs

With the software we provide a few example programs showing you how to use timers, read digital inputs and write to digital outputs, control stepper motors and generate PWM signals. (Note only the XMP3-18RT-C has high speed outputs for high frequency motor control and PWM pulses.)

To program the screen the OP Screen software is used.

Program Instructions:

Shipping Weight: 0.35 kg