The N2000 Universal Process
Controller is a real breakthrough in versatility for holding in one
single instrument all the major features required in the vast majority
of industrial processes.
With a sophisticated and consistent software and its advanced truly
universal circuitry, the N2000 accepts configuration of both input
signal and control output through the front keyboard without any
internal hardware change.
Power supply for remote loop powered transmitters is standard and is a
must for high-end applications.
From the very simple applications as a temperature controller to the
most complex systems of distributed control with PLC’s or SCADA
networks, the N2000 is the right answer to your needs for industrial or
laboratory automation.
The N2000S model is specific for applications in controlling servo motorized
valves, servo actuators and dampers by means of two time proportional
relays.
A Modbus RTU RS485 connection is fitted. You can use the
Superview software or
ISEE-Modbus Software to
monitor and set parameters in the controller
|
 |
Features
- Universal Input accepts thermocouples type J, K, T, N, R, S;
Pt100 RTD, linear 4-20 mA, 0-50 mV, 0-5 Vdc.
- Double LED display: red for PV and green for SV.
- Dual SPST 3A/250 Vac relays and dual SPDT 5A/250 Vac relays can be
individually programmed for control or alarm.
- Isolated 4-20mA output with 1500-level resolution, maximum 550 ohm
load for control or PV/SV retransmission. It can also be configured
for digital input or output (10 Vdc/20 mA).
- Sampling rate: 4 measurements per second.
- One digital input for dry contact with 5 programmable functions.
- Remote setpoint input for 4-20 mAdc signal (N2000).
24 Vdc/30 mA supply output for remote transmitter excitation.
- RS485 comm with Modbus RTU protocol.
- Auto tuning PID control.
- Auto/Manual mode, bumpless transfer.
- Programmable Soft start up to 9999 seconds.
- Ramp and Soak: 7 programs of up to 7 segments each. Can be linked
to create longer programs of up to 49 segments.
- Measured value resolution: 12,000 levels.
- Control output update: 250 ms.
- Up to four configurable relays, two timer alarms.
- Alarm functions: LO, HI, differential, differential LO,
differential HI, sensor break and event.
- Alarm initial blocking function.
- Power: 85 to 250 Vac, 50/60 Hz; optional 24 Vdc/ac.
- Maximum consumption: 4 VA.
- Operating environment: 0 to 55ºC, 20 to 90%RH.
- Front panel: IP65, Polycarbonate UL94 V-2.
- Back panel: IP30, ABS+PC UL94 V-0.
- Dimensions: 48 x 96 x 92 mm.
- Panel cutout: 45.5 x 93 mm.
- Weight: 240 g (265 g with options).
Download the
N2000 and N2000S Flier
Download
the N2000 Operating Manual
Download
the N2000S Operating Manual
Purchasing the
N2000 and N2000S Controller
All prices are in Australian Dollars. Prices
do not include GST (Goods and Services Tax). 10% GST applies to goods delivered in
Australia. Australian GST is not paid on shipments despatched to an international
destination. You can check the exchange rate by going
to http://www.x-rates.com
|
|
