The
N3000 Big Digit Universal Process Controller
is a real breakthrough in versatility for holding in one single
instrument all the major features required in the vast majority of
industrial processes.
With a sophisticated and consistent software and its advanced truly
universal circuitry, the N3000 accepts configuration of both input
signal and control output through the front keyboard without any
internal hardware change.
Power supply for remote loop powered transmitters is standard and is a
must for high-end applications.
From the very simple applications as a temperature controller to the
most complex systems of distributed control with PLC’s or SCADA
networks, the N3000 is the right answer to your needs for industrial or
laboratory automation.
A Modbus RTU RS485 connection is fitted. You can use the
Superview software or
ISEE-Modbus Software to
monitor and set parameters in the controller
|
Purchase |
Features
- Double LED display: red
for PV (18 mm) and green for SV (13 mm).
- Accepts thermocouples type
J, K, T, N, R, S; Pt100 RTD, linear 4-20 mA, 0-50 mV, 0-5 Vdc.
- Sampling rate: 4
measurements per second.
- Measured value resolution:
12,000 levels.
- One digital input for dry
contact with 5 programmable functions.
- Remote setpoint input for
4-20 mAdc signal.
- Dual SPST 3 A / 250 Vac
relays and dual SPDT 5 A / 250 Vac relays can be individually
programmed for control or alarm.
- Isolated 4-20 mA output
with 1500-level resolution, maximum 550 ohm load for control or PV/SV
retransmission. It can also be configured for digital input or
output (10 Vdc / 20 mA).
- Auto tuning PID control.
Auto/Manual mode, bumpless transfer.
- Programmable Soft start up
to 9999 seconds.
- Ramp and Soak: 7 programs
of up to 7 segments each. Can be linked to create longer programs of
up to 49 segments.
- Control output update: 250
ms.
- Up to four configurable
relays, two timer alarms.
- Alarm functions: LO, HI,
differential, differential LO, differential HI, sensor break and
event.
- Alarm initial blocking
function.
- Power: 100 to 240 Vac,
50/60 Hz; optional 24 Vdc/ac.
- Maximum consumption: 3 VA.
- 24 Vdc / 30 mA supply
output for remote transmitter excitation.
- RS485 comm with Modbus RTU
protocol (optional).
- Front panel: IP65,
Polycarbonate UL94 V-2.
- Back panel: IP30, ABS + PC
UL94 V-0.
- Circuitry can be removed
from the front panel.
- Operating environment: 0
to 55 ºC, 20 to 85 % RH.
- Dimensions: 96 x 96 x 92
mm.
- Panel cutout: 93 x 93 mm.
- Weight: 330 g.
Download the
N3000 Flier
Download
the N3000 Operating Manual
Purchasing the
N3000 Controller
All prices are in Australian Dollars.
Prices
do not include GST (Goods and Services Tax). 10% GST applies to goods delivered in
Australia. Australian GST is not paid on shipments despatched to an international
destination. You can check the exchange rate by going
to http://www.x-rates.com
|
|
