N322T Temperature Thermostat with Timer

Temperature controller for heating and refrigeration purposes with timer support. It has PT100 RTD, thermistor NTC or J thermocouples inputs available. Allows energy time delay and minimum on/off time settings
The NTC Thermistor model is provided with a NTC Thermistor and 2m long cable to get you up and running immediately.

The timer output is typically used for the system defrost. The t1 and t2 parameters define, respectively, the interval and duration of the defrost cycles.
Manual Defrost: the key allows for the timer start or reset. Pressing this key for at least 1 second, the timer output is toggled. The display P2 sign lights when the timer output is on. The timer output is usually used for defrost in refrigeration systems. In different applications it can be used to periodically start other loads, such as a mixer, fan, etc.

Sensor input: Thermistor (-50 to 120 ºC), Pt100 (-50 to 300 °C), Thermocouple J (0 to 600 °C).
IP65 enclosure frontal protection
Output: 10 A control relay and 3 A alarm relay
Resolution: 0,1 °C from -19,9 to 199,9 °C
Operating temperature: 0 to 40 °C
Power supply: 100~240 Vac/dc (± 10 %) or 24 Vdc/ac (12~30 Vdc/ac)
RS-485 digital communication; RTU MODBUS protocol (optional)
Dimensions: 75 x 33 x 75 mm

• Heating
• Cooling

Output 2 - 3A, 250VAC, SPST Relay

• Heating
• Cooling
• Low Alarm
• High Alarm
• Inside Range Alarm
• Outide Range Alarm
• Low Alarm with Initial Blocking
• High Alarm with Initial Blocking
• Inside Range Alarm with Initial Blocking
• Outide Range Alarm with Initial Blocking

Download the flier

Download the manual for a full product details