Ocean Controls
PO Box 2191
Seaford BC
Factory 3/24Wise Ave

Seaford,
Vic, Australia 3198
ABN 22 061 932 027

Ph 61 3 9782 5882
Fax 61 3 9782 5517

Email Us


• Catalogue
• Shopping Cart
• Distributors
• Ordering Info
• Specials
• What's New
• Home
• Audio
• Communications
• Computer Products
• Controllers
• Counters Timers
• Data Acquisition
• Data Loggers
• Electrical Parts
• Micro Programmers 
• Modbus Products
• Moscad RTU
• Motor Controllers
• Motors
• Panel Meters
• PLC's
• Power Supplies
• Relays
• Sensors
• Signal Conditioners
• Software
• 
Software Industrial
• Test Equipment
• Tools



   


SOM96 RELAY CONTROLLER
A controller with 4 relays. Up to 256 controllers can be connected to a PC's serial port.


The SOM96 Serial Output Module is designed to be used with IBM PCs and compatibles. Each module has 4 independent single pole changeover relays which can be independently addressed from the PC. The standard RS232 serial output is converted to RS485 by the first module and this is used to drive subsequent modules. Each module may be allocated one of 256 addresses, thus allowing for control of 1024 relays. Addresses are selected using an 8 way DIL switch and more than one module can have the same address.

This will allow several relays to be controlled simultaneously. Modules can be physically placed in positions remote from the PC. The link from the PC Serial Port to the first module is restricted to approximately 50 metres. After that modules can be located as much as 200 metres apart. Connection between the PC and the first module would normally use a standard null terminated modem lead connected to the 9 pin 'D' connector.

From the first module to subsequent units twin screened cable is recommended with connections to the screw terminal block provided. Inter-module wiring may be either parallel or serial with 'T' junctions as required.
 

 


Features
The VIOM Controller board has

  • Remote Operation.
  • Easy Installation.
  • Switches 2 Amps dc/50 Volt ac (1 Amp inductive).
  • Control up to 256 Modules on a Single Serial Port
  • Voltage Free Changeover Relay Contacts
  • Versatile Inter-unit Wiring
  • Compact Size
  • PC to Module Connection via a Standard RS232 Lead
  • 9600baud Serial Port.
  • ASCII commands.

Applications
The SOM96 Controller board can be used in

  • Process Control.
  • Environmental Control.
  • CCTV Controllers.
  • Home Automation
  • Remote Control of Lamps, Motors, etc

 

Purchasing the SOM96 Controller

All prices are in Australian Dollars.
Prices do not include GST (Goods and Services Tax). 10% GST applies to goods delivered in Australia. Australian GST is not paid on shipments despatched to an international destination. You can check the exchange rate by going to http://www.x-rates.com

Item Description Quantity Price(AUD$)
NET-030 SOM-96 Relay Card $109.00