Sick
of paying a fortune to monitor temperatures in your Server
rooms, green houses, or other temperature controlled rooms.
The Ocean Controls K145
Server Software is a budget
priced Windows based HTTP, Email and Modbus TCP Server for the K145
4 Channel
Temperature Logger. By plugging the K145 4 Channel Temperature
Logger into a serial port of a networked PC and then installing
the K145 Servor software you are able to provide remote
temperature monitoring at a fraction of the price of other
solutions. |
 |
Use
it to monitor:
-Computer Server Room Temperatures
-Greenhouse Temperatures
-Home Temperature from Work
-Any Application where immediate notification of Temperature is required
Main Features:
-Monitor Temperatures in Real Time from anywhere in the world over the Internet, using only a web browser
-Easily see if Temperatures are within Alarm Limits
-Monitor Maximum and Minimum Temperatures
-Sends Emails
to three different email addresses when Temperature enters Alarm State and returns to Normal
-View real
time and Logged Data using Modbus TCP connection
A web browser can be
used to connect to the computer running the K145 Server. A web page
containing a table detailing the following is shown for each.
-Name
(A tag which is used to
describe the sensor )
-Temp
(The Current
Temperature of the Sensor)
-Min
(The Minimum
Temperature seen by the sensor)
-Max
(The Maximum
Temperature seen by the sensor)
-Low
(The Low
Temperature set point)
-High
(The High
Temperature set point)
-Hyst
(The
Difference between the current temperature and the set point required
for the alarm state to be entered)
-State
(The current
state of the sensor).
On your remote PC you can Plot the Temperatures in real time. The latest version of our TempLogger software can be used to connect via the Modbus TCP
connection. The TempLogger software can also be used to view Logged Data
on the K145Server by downloading the contents
of the Modbus Holding Registers in which 989 readings for each of the 4
Temperature Sensor are stored.
The K145 Server software can be downloaded and installed on your PC. It
will run as a demo for 15 minutes. If purchased you will be required to
email us the serial number (the serial number is linked to the PC you
are installing the software on) and we will email you the registration
number.
The K145 Server can be purchased in two different forms.
- K145 Server Pack includes a K145 Temperature logger, one DS18S20
sensor, the K145 Server and Temperature Logger Software. Extra DS18s20
sensors can be purchased separately
- K145 Server Software. If you have bought the K145 4 Channel Temperature Logger
elsewhere you don't need to feel left out. You can purchase the
K145 Server Software separately
The TempLogger Software is free and does not need to be registered.
To try it simply
DOWNLOAD K145
Server
DOWNLOAD TempLogger
| 
