FEATURES
Very easy to assemble it features
- a 12 bit ADC with 8 single ended inputs reading 0 to
4Volts. The inputs can withstand up to +/-20V.
- ADC conversion time of less than 10 usecs. Note using
windows software reduces this speed
- 4 Digital Inputs that are TTL and CMOS compatible
- 4 Digital Outputs that are TTL and CMOS compatible that
are capable of sourcing and sinking 6mA.
Measuring just 60x55x20mm the DAS005 is able to fit into your shirt pocket and with its
low power requirements it can be powered by a 9V to 12V battery making it very suitable
for portable situations. A 25 way terminal board can be purchased for easier
connections to I/O.
If you wish to switch heavy current loads with the digital outputs check out the 12VDC relay for TTL outputs. A temperature sensor -40 to 100degC is also
available |
 |
ISEE DATA ACQUISITION PROGRAM
The ISEE data acquisition and HMI program which comes free with the DAS005 and
the DAS010 makes them one of the most powerful data acquisition and control devices
for its price on the market today. Running under Windows XP/2000/NT/ME/98 and 95 it allows
the user to
- View the analog inputs. They can be viewed as raw readings 0 to
4000 or in engineering units.
- View the status of the digital inputs
- Control the status of the digital outputs
- Display the analog inputs on graphs or trends
- View the maximum and minimum values for each of the analog inputs
- Log analog inputs and digital inputs and variables to disk
- Can display alarms
- Has a control language consisting of 50 If-Then statements allowing
calculations and control to be done
- The program configuration can be saved to disk
DOWNLOAD ISEE Program Version 3.10
3/5/04
PROBLEMS RUNNING TRENDS ON ISEE PROGRAM
Users with Windows 95 could experience problems running trends. Internet Explorer
4 or later should be installed on the PC. The latest MFC dlls should also be installed.
These can be downloaded from Microsoft at http://activex.microsoft.com/controls/vc/mfc42.cab
HI SPEED DATA ACQUISITION PROGRAM
The ISEE program can only log data at speeds up to 50 msecs. The HiSpeedDas
program permits Data Acquisition Speeds up to 1 msecs. You simply select the speed of
acquisition, what inputs to log, the log file and how you want the logging to be
triggered. This program only runs on Windows 98 and 95
Download High Speed Data Acquisition Program
SAMPLE PROGRAMS
The following programs contain all the source code and dlls needed to write your own
program to monitor and control the I/O on the DAS005 Data Acquisition Module. Programs are
written for Visual Basic 5, Visual Basic 6 Borland Delphi Version 2 and
Borland C++ Builder Version 3.
Download VB5 Sample Program for Windows95/98
Download VB6 Sample Program for Windows95/98/ME/NT/2000/XP
Download Delphi Sample Program for Windows
95/98/ME/NT/2000/XP
Download Borland C++ Builder Sample Program for
Windows 95/98/ME/NT/2000/XP
The VB5 uses inpout32.dll while the Visual Basic 6,
Delphi and Borland C++ program use IO.dll to access the parallel port. The InpOut32.dll is
freeware and is available from www.lvr.com. This web site
is invaluable to understand the workings of the parallel port. InpOut32 will allow your
program to run only on Windows 95 and 98.
IO.dll is also freeware. It will allow your program to run on Windows 95, 98, ME, NT and
2000. It is recommended you read the the
file ioreadme.txt in the io.zip file which has useful information about the functions
available, running the dll under Windows NT
and 2000 and legal restrictions.
ALL SOFTWARE AND DOCUMENTATION IS PROVIDED
ON CD INCLUDED WITH THE DAS005
PURCHASING THE DAS005 DATA ACQUISITION KIT
All prices are in Australian Dollars. Prices do not include GST (Goods and
Services Tax). 10% GST applies to goods delivered in Australia. Australian GST is not paid
on shipments despatched to an international destination. You can check the exchange rate
by going to http://www.x-rates.com Please
note our plug packs are suitable only for 240VAC mains (Not suitable for North America)
