Now Available -
iUSBDAQ-U1208LOG
The iUSBDAQ - U1208LOG is the only
multifunction three in one (3-in-1) USB data
acquisition module that provides PC control mode for fast speed data
acquisition and transfer (up to 64KSamples/s)
as well as standalone data logging mode for
direct data logging into USB flash drive without computer, the storage
capacity is virtually unlimited, it's up to
your USB flash disk space. Another unique feature that
iUSBDAQ - U1208LOG brings, is the build-in video functions in
programming APIs
as well as in the FREE ready-to-run iDAQTest&Log software for easy
integration
and synchronization of data and video. A dedicated video trigger output
line is also
provided in the hardware for external synchronization with other
devices.
|
Only
AUD$299 + GST
Download
Manual
It's a fast speed multifunction USB DAQ.
It's a stand alone USB flash drive data logger.
It's a DAQCAM with video functions. |
Features
- iUSBDAQ - U1208LOG module
- FREE USB power adapter as power
supply for standalone logging mode.
Input: AC100-240V, 50-60HZ. Output: DC 5.0V, 600mA.
- FREE USB2.0 cable (with noise
protection filter ring) used for PC control,
also used as cable for USB power adapter
- FREE Screw driver
- FREE iDAQTest&Log software with
build-in real time life video and data
synchronized display, avi file recording, avi file playback, data
logging,
analog voltages, digital DIOs and counter measuring and PWM output
testing functions. This is a very easy to use, yet functions rich
software for
users who do not want to program their own software. It's ready to
run.
- FREE programming API for C/C++, VB,
LabVIEW drivers (with rich
examples) that can access all functions for AIs, DIOs, PWM, counter
as well
as video functions, this is for users who wish to create their own
software.
Video Functions
With the decrease of video camera/webcam prices and increased computer
powers, the demand to add video functions into
traditional data acquisition application is increasing. Synchronization
between video and data is always not an easy thing to do,
since consumer video camera/webcams do not provide trigger out or
trigger in line, besides such video/data application is
usually very expensive. iUSBDAQ - U1208LOG provides a solution
that makes integration of video and data easy, yet very cost
effective. iUSBDAQ - U1208LOG introduces the DAQCAM marriage
concept that can help your end application to be more
competitive on the market.
Data Logging Functions
The standalone USB flash drive data logger mode will turn this USB DAQ
into USB OTG (on the go) device. It can be used without computer for
long time data logging at field, logging period from 1second to 12
hours. It logs 8 channels of analog inputs, 16
digital line status as well as the 16 bit counter value. On board real
time clock will time stamp the logging file. A 3V
lithium battery on board will keep the real time clock date/time.
Besides, at each time of data logging, a dedicated video/log
"trigger out" line will output a pulse, which can be used to
synchronize external measurement devices if needed.
Click for larger image
Features
Below highlights the key feature points of the iUSBDAQ -
U1208LOG USB data acquisition module.
PC control mode:
- USB 2.0/1.1 full speed interfaceUSB bus powered
- 8 Single-Ended, 12-Bit analog Inputs
- 0-4.096 V analog input range
- Up to 64 kSamples/Sec throughput rate with single channel up to
53kSamples/Second for continuously streaming to PC
- One dedicated "trigger in" line for streaming mode data acquisition
- One dedicated video/Log "trigger out" line that sends out pulses for
video frames or when log data in standalone data logging mode
- Two programmable 10-bit PWM outputs (3kHz- 333kHz)
- 16 channels of Bi-Directional Digital I/O lines (250HZ update rate)
- One 16-Bit counter
- 240 bytes EEPROM reserved for user data
- Multiple iUSBDAQs can be connected on same computer
- Simultaneous Streaming from Multiple iUSBDAQs Possible, streaming data
and streaming video at the same time possible.
- Works with Windows 2000, or WinXP. Recommend 2.4GHZ or up CPU and at
least 512M RAM
Key features of the USB flash drive standalone data logger mode:
- Virtually unlimited storage size for data logging, it's up to your USB
flash disk's storage size.
- Can be powered by USB bus from computer or use included USB power
adaptor without computer.
- Logging 8 channels of analog inputs, 16 channels of digital inputs and
one 16 bit counter. All data are time stamped.
- Logging interval/frequency from 1 second to 12 hours, unlimited log
period as long as USB disk has enough free space. Logging frequency
configurable with FREE iDAQTest&Log software
- Automatic file name creation with time stamp.
- Raw data conversion utility and simple analysis functions provided in iDAQTest&Log software
- On board lithium battery to power the real time clock. Date/time
setting of real time clock on board is configurable with iDAQTest&Log
software
- Dedicated log "trigger out" line for synchronization of external
devices.
Key features of the Video Functions:
-
Real time video display along with the data readings (8 ch. analog
inputs, 16 ch. digital IOs and one counter)
-
AVI recording along with data recording (8 ch. analog inputs, 16 ch.
digital IOs and one counter)
-
Playback AVI file along with data (8 ch. analog inputs, 16 ch. digital
IOs and one counter)
-
Dedicated video "trigger out" line
-
Work with USB webcam or firewire camera that support WDM driver or are
directshow compliant
General Information:
-
30 Days Money Back Guarantee, 6 Month Warranty and Trade In Policy
-
Approximately 3.5" x 3.375" x 1.125" (9cm x 8.5cm x 3cm)
-
0°C to 70°C operating temperature range
Powering the
Datalogger
When logging the datalogger
is powered from the 5V on the USB port.
We have two options available
USB-010 A
mains
voltage powered switchmode adapter with 5VDC output and 1A
maximum current. USB cable not included as most users will
already have this but we have a range of USB cables available
including a model to suit the iPod.
Specifications:
* Input Voltage: 100-240VAC 50/60Hz
* Output Voltage: 5VDC Regulated
* Output Current: 1A max.
* Size: 68x55x52mm+5V |
 |
| USB-011
a 12V car battery to +5V USB Power supply |
 |
Purchase
All prices are in Australian Dollars. Prices do not include GST (Goods and Services Tax). 10% GST applies
to goods delivered in Australia. Australian GST is not paid on shipments despatched to an
international destination. You can check the exchange
rate by going to http://www.x-rates.com
|
