TagTemp is a compact water proof temperature data logger. Housed in an
IP67 enclosure, TagTemp can be installed in harsh environments in
different applications.
It can be easily programmed and set via a handy infrared IR-LINK 3
interface connected to a USB port under Windows LogChart II software or
with a Palm compatible PDA IrDA interface under PalmOS.
LogChart II software allows for logger configuration, recorded data
retrieval, plotting, historical analysis and exports data to
spreadsheets.
Powered by an inexpensive lithium coin cell, it can operate continuously
for more than one year. When the battery has expired it can be replaced
with a new one. Its high resolution (14 bit ADC) and data memory
capacity (16k loggings) makes it the ideal product for accurate
monitoring of temperature for long periods or fast sampling
Starter Pack Now Available.
Contains 2 Tagtemp Dataloggers, a USB-IRLink and Logchart software. All
you need to get you started for $199.00
|
 |
Features
- Enclosure: IP67, flame retardant, ABS+PC
- Dimensions: 47 x 30 x 12 mm;
- Temperature measurement accuracy: ±0.5 șC;
- Reading resolution: 14 bits or 16,384 levels;
- Memory capacity: 16,000 loggings;
- Reading intervals: from 1 second to 18 hours;
- Loggings can be programmed to start immediately, outset by the
devices button, by date/hour or by a programmed setpoint or through a
PDA;
- Loggings can be programmed to stop: at full memory; at some specified
date and hour, number of samples or never (circular memory);
- Internal button to command start/stop logging;
- Configuration and data retrieval software for Windows 98, XP, 2000 and
PalmOS;
- Non contact IR communication up to 2 feet, 30ș angle;
- Operating temperature: -40 șC to +80 șC;
- Internal replaceable lithium coin cell (2032 type);
- Estimated battery life: 1 year with one weekly download and 5 minutes
measuring interval. Battery life depends heavily on data retrieval
frequency;
- Accepts up to 40 identification characters for user application;
- LED indication of functioning mode and alarm.
Logchart Software
The configuration of
the
TagTemp is done by
the included LogChart software. Data is transmitted to the TagTemp
through an Infrared wand connected to the PC's USB port. The Parameter
Configuration window in LogChart lets you configure the following
parameters:
Logging session title
Channel setup - name, type,
limits, scaling
start log options - immediatley
or timed
log rate
logging options - stop when full,
set number of readings
or roll-over
After the logging session is complete, data can then be downloaded again
by LogChart and displayed in table and chart formats. Data files can
then be saved as ASCII text files for importation into common
Spreadsheets. It is also possible to monitor
data in real-time.
Palm PDA Software
Most of the
functionality of the LogChart II is available for the PDA Palm running
the LogChart PalmOS software. The program is supplied with the logger.
The program is installed on the Palmtop through a HotSync process (data
synchronization between a Palmtop and a PC).
Starting the LogChart PalmOS application will display the Recorded Data
screen on the Palm where it is possible to access the TagTemp
configuration to change settings and collect data, as well as to access
collected data.
HotSync of data stored in a PDA to a PC is performed through a conduit
installed together with the LogChart Palm-OS. The conduit converts the
data collected by the LogChart Palm-OS to a file compatible with the
LogChart-II software.
Download
the Operating Manual
Purchasing the TagTemp
All prices are in Australian Dollars. Prices
do not include GST (Goods and Services Tax). 10% GST applies to goods delivered in
Australia. Australian GST is not paid on shipments despatched to an international
destination. You can check the exchange rate by going
to http://www.x-rates.com
|
