Atmel Programmers

Ocean Controls
PO Box 2191
Seaford BC
Factory 3/24Wise Ave
Seaford,
Vic, Australia 3198
ABN 22 061 932 027

Ph 61 3 9782 5882
Fax 61 3 9782 5517

Email Us

• Catalogue
• Shopping Cart
• Distributors
• Ordering Info
• Specials
• What's New
• Home
• Audio
• Communications
• Computer Products
• Controllers
• Counters Timers
• Data Acquisition
• Data Loggers
• Electrical Parts
• Micro Programmers
• Modbus Products
• Moscad RTU
• Motor Controllers
• Motors
• Panel Meters
• PLC's
• Power Supplies
• Relays
• Sensors
• Signal Conditioners
• Software
• Software Industrial
• Test Equipment
• Tools

Atmel Microcontroller Programmers

AVRISP-MKII In-System Programmer!
The Atmel® AVRISP MK2 ( AVRISP MKII Communication Protocol ) is an In-System Programmer for Atmel's AVR® Flash microcontrollers. The AVRISP MK2 gives the designer a compact and reliable programming tool to program all In-System Programmable AVR microcontrollers through a 6 pin ISP connector.
The AVRISP MK2 uses AVR Studio®, Atmel's Integrated Development Environment (IDE) for code writing and debugging.
The programming software can be controlled from both a Windows® environment and a DOS command-line interface.

o AVR Studio Operated
o USB Serial In-System Programming
o USB Interface to PC
o Upgrades are done from AVR Studio
o Target Voltage 2.7 6.0V
o Powered from Target. No Need for Additional Power Supply

The AVRISP MK2 is a compact and easy-to-use In-System Programming tool for developing applications with Atmel's AVR microcontrollers. Due to the small size, it is also an excellent tool for field upgrades of existing applications using AVR microcontrollers.
The AVRISP MK2 Programming interface is integrated in AVR Studio. The Flash, EEPROM and all Fuse and Lock Bit options ISP programmable can be programmed individually or with the sequential automatic programming option. The AVR clock frequency and supply voltage can also be controlled from AVR Studio.

Purchase!

KT5122 Atmel AVR Programmer!
This versatile programmer can program 20-pin DIP - 90S1200, 90S2313, and 40-pin DIP - 90S4414, 90S8515. Connecting to the serial port of the PC it programs the controller in parallel mode. With the optional adaptor board you can now program AT90S4434 and AT90S8535. Please note it will not program the 8-pin AVR devices (90S2323, 90S2343). Terminal program supplied. ZIF sockets are not supplied.

Purchase!

PURCHASING THE PROGRAMMERS
All prices are in Australian Dollars. Prices do not include GST (Goods and Services Tax). 10% GST applies to goods delivered in Australia. Australian GST is not paid on shipments despatched to an international destination. You can check the exchange rate by going to http://www.x-rates.com