Ocean Controls
PO Box 2191
Seaford BC
Factory 3/24Wise Ave
Seaford,
Vic, Australia 3198
ABN 22 061 932 027
Ph 61 3 9782 5882
Fax 61 3 9782 5517
Email Us
Catalogue
Shopping Cart
Ordering Info
Specials
What's New
Home
Audio
Communications
Computer
Products
Controllers
Counters
Timers
Data
Acquisition
Data Loggers
Micro
Programmers
Modbus Products
Moscad RTU
Motor
Controllers
Motors
Panel Meters
PLC's
Power
Supplies
Relays
Sensors
Signal Conditioners
Software Commercial
Software
Industrial
Test Equipment
|
16 Digital Input Modbus module |
16 Digital Input Modbus Module
TRP-C26 provides 16 optical isolated
digital input channels that allow you to input the logic signal from 0 to
30V DC. All channel features screw terminals for convenient connection of
field signals as well as LED’s to indicate channel status. All inputs are
equipped with photo-couplers to protect the module against high voltage
spikes, as well as ground potential differences. For easy user access,
TRP-C26 can enter configuration mode and self-test mode with outer
dip-switch. TRP-C26 support both ASCII and Modbus protocol, with a full set
of command, dual watch-dog, and auto reset function the module can be remote
controlled by PC in ASCII or Modbus RTU protocol .
.
Features
- Wide input range DC power supply..
- Support ASCII and Modbus RTU protocol.
- Supports baud rates from 1.2Kbps to 115.2 Kbps.
- All 16 Digital Inputs can be used as a counter
- Digital output signal with 3750Vrms isolation protection.
- Dual watchdog: Module’s firmware, host computer traffic.
- LED for each channels working status.
- DIN-Rail and panel mount support.
- Configured and self-test by external dip-switch.
- Support screw terminal and external DC power adaptor.
|

Download
Manual!
Application Note!
Purchase! |
|
Specifications
- Power Input Voltage: DC +10V to +30V.
- Protocol: ASCII and Modbus RTU.
- Input channel: 16 digital input channels with counter.
- Input digital input counter: 0~65535.
- Input optical isolation: 3750 Vrms.
- Input logical level 0 +1V (max).
- Input logical level 1 +4.0V ~ +30V.
- Communication interface: RS-485.differential 2 half.duples wires.
- Communication speed: Baud rate from 1200bps to 115.2Kbps.
- Data format: Data bit: 8, Parity Check: None, Stop Bit: 1 .
- Input impedance: 3K?.
- Inputs can be use as counter channel: 16.
- Counter frequency: 100 Hz.
- Dual watchdog Hardware reset circuit, module and host operating status.
- Signal LED: Power on, all input channels
- Power supply: Screw terminal, or standard external DC adapter
- Power consumption: 1.5W (max)
- Operating environment: 0 to 60?.
- Storage temperature: -20 to 70?.
- Humidity: 10-90% non-condensing.
- Dimension: 151mm X 75mm X 26mm .
- Weight: 395g .
|
|
Option
- DIN rail mounting adapter. |
 |
Option
- 12VDC Plug Pack.
Please note this Plug Pack is only suitable for use in Australia and New
Zealand. |
 |
PURCHASING THE CONVERTERS
All prices are in Australian Dollars. Prices do not include GST (Goods and
Services Tax). 10% GST applies to goods delivered in Australia. Australian GST is not paid
on shipments despatched to an international destination. You can check the exchange rate
by going to http://www.x-rates.com
|
|
|
|
|
|
|
|
|
|