The VIEW-INTEGRA data
acquisition program is a fully featured minimum cost HMI program for controlling and
monitoring Crompton Instruments Integra 1500 series of Digital Meters. Running under
Windows XP/2000/NT/ME/98 it allows the user to - Interrogate up to
30 Digital Meters
- Supports RTU Modbus
- All Parameters are already defined ready to use
- View the value of parameters and units.
- Can reset Energy consumption values such as Total KWs
- Can define your own internal variables or tags for control and alarm
purposes
- No graphics to draw. Simply display the readings on the screens.
Readings can be grouped as you like.
- Display values of parameters and internal variables on graphs or
trends
- View the maximum and minimum values for each tag
- Log parameters and internal variables to a csv type file. This can be
imported to Excel
- Display and analyse Historical logged files on graphs
- Display and control alarms
- Has a control language consisting of If-Then-Else statements allowing
calculations and
control to be done.
- The program configuration can be saved to disk
All Integra Parameters and
user defined variables are defined as tags with real names and real engineering units
making it easy for you to understand what is going on. The tags for the Integra Digital
Meters are automatically generated for up to 30 meters so you don't have to do anything
Simple to configure and run, the
VIEW-INTEGRA software will allow you to monitor the Integra Digital Meters All
Integra parameters such as line voltage, line current, watts etc can be logged to a time
and date stamped csv file. The csv file can be easily imported into Excel or Access for
analysis or you can use our charting feature ( see image below) to analyse the data. The
operator can use the cursor on the charts to look at values and easily zoom in and out.
To try it simply DOWNLOAD VIEW-INTEGRA Version 1.07
20th May 2007
|
