Ocean Controls
PO Box 2191
Seaford BC
Factory 3/24Wise Ave
Seaford,
Vic, Australia 3198
ABN 22 061 932 027
Ph 61 3 9782 5882
Fax 61 3 9782 5517
Email Us
• Catalogue
• Shopping Cart
• Distributors
• Ordering Info
• Specials
• What's
New
• Home
• Audio
• Communications
• Computer
Products
• Controllers
• Counters Timers
• Data Acquisition
• Data Loggers
• Electrical
Parts
• Micro
Programmers
• Modbus Products
• Moscad RTU
• Motor
Controllers
• Motors
• Panel Meters
• PLC's
• Power Supplies
• Relays
• Sensors
• Signal
Conditioners
• Software
• Software
Industrial
• Test Equipment
• Tools
|
DMC5400 Motion Controller
|
SMC-200 DMC5400 Advanced 4-axis Stepping & Servo Motion Control Card
The
DMC5400 is an advanced 4-axis motion control card for stepping and digital
servo control application. Compared with the DMC1000 and DMC3400 series,
DMC5400 offers better linear and circular interpolation capability and
continuous contouring performance for advanced pulse output
motion control solutions.
Features
- 32-bit PCI bus, Rev. 2.2, 33MHz
- Pulse output r rate up to 5MHz
- 6 Pulse/dir output modes: Pulse /DIR,
CW/CCW etc
- 2~4 axes linear interpolation
- 2 axes circular interpolation
- Multi-axis continuous interpolation
- Position/speed change on-the-fly
- 13 home return modes and auto home
search
- 4 axes incremental encoders input with
28-bit up/down counter
- Hardware position compare and trigger
with auto-loading FIFO
- High speed position latch function
- 32 General-Purposed I/O
- Manual pulser input interface
- Programmable acceleration and
deceleration time
- Trapezoidal and S-curve velocity
profiles
- Multi-axis, simultaneous start/stop
- Programmable interrupt sources
- Supports up to 5 cards in one system
(20 axes)
- Hardware backlash compensator
- Software limit function
- Easy interface to any stepping and
digital servo
|
Purchase
Download
hardware manual file
Download
software manual file
|
Velocity or Position Override
The DMC5400 provides powerful position or speed
changing function while axis is moving. After motion
begins, target of speed or position can be changed on
the fly at the user's discretion.
Linear & Circular Interpolation
In multi-axis operation, the DMC5400 provides linear
interpolation by any 2, any 3, or even all-4 axes. And
any 2 axes can perform circular interpolation.
Continuous Contouring
The pre-register architecture of DMC5400 offers the
feature to build the continuous interpolation
function. The 2nd motion may follow
previous motion instantly without latency. Thus
perfect velocity continuity can be established.
Position Latch
The latch function is to capture the instant counter
value of one or more axis when the latch signal
activates. The LTC channel is used to receive the
latch pulse. The latch function is implemented with
hardware at very high speed.
13 Home Return Modes
To fit into various mechanical design and operating
restrictions, the DMC5400 provides 13 home moving
modes for users to choose as their best convenience.
Simultaneous Start/Stop
By using software program or external input signal,
the DMC5400 can perform simultaneously start/stop
function on multi-axis in one card or multi-axis in
multi-card. Also, the simultaneous stop function is
selectable to be active when some axes are
abnormally stopped.
Software Available
Windows Platform
Driver and DLL supports for Windows XP/2K/NT/98. VB/VC++/BCB are the
recommended programming tools.
MOTION5400
MOTION5400 assists the motion system developer in testing motion functions,
and overcome the difficulty of system configuration before programming..
|
PURCHASING THE CONTROLLER CARD
All prices are in Australian Dollars. Prices do not include GST (Goods and
Services Tax). 10% GST applies to goods delivered in Australia. Australian GST is not paid
on shipments despatched to an international destination. You can check the exchange rate
by going to http://www.x-rates.com
|
 |
|
|
|
|
|
|
|
|