SPS407 Stepper Motor Power Supplies
SPS series power supplies are switchable DC power supplies specifically designed for stepping & servo driver. The normal regulated switchable power supplies popular in the market are usually working with bad variability and low efficiency when used in stepping or servo driving, this is because that the conventional switching power supplies are designed for the constant, unvarying loads of circuit boards. Whereas, when the stepping or servo system running, the driving current varies extremely fast, which is belonged to inductive load, herein the driver and power supplies would be damaged easily. This supply is capable of delivering current to motor drivers without affecting the reliability due to its unregulated specialty and bulky capacitance. By selecting correct model, one supply can drag 1-3 shafts motors and so the average cost per shaft is saved.

Features

• Designed specifically for stepping/servo using
• Compact size, lightweight
• Output power 300W (continuous work)
• Short circuit, over-current & over-voltage
   

The SPS407 provides 7A continuous at 40V (9A Peak current). Input Supply 240VAC
Dimensions - 112×102×55mm
Weight - 0.45Kg

Download datasheet file
 

Purchase

SPS487 Stepper Motor Power Supplies
SPS series power supplies are switchable DC power supplies specifically designed for stepping & servo driver. The normal regulated switchable power supplies popular in the market are usually working with bad variability and low efficiency when used in stepping or servo driving, this is because that the conventional switching power supplies are designed for the constant, unvarying loads of circuit boards. Whereas, when the stepping or servo system running, the driving current varies extremely fast, which is belonged to inductive load, herein the driver and power supplies would be damaged easily. This supply is capable of delivering current to motor drivers without affecting the reliability due to its unregulated specialty and bulky capacitance. By selecting correct model, one supply can drag 1-3 shafts motors and so the average cost per shaft is saved.

Features

• Designed specifically for stepping/servo using
• Compact size, lightweight
• Output power 300W (continuous work)
• Short circuit, over-current & over-voltage
   

The SPS487 provides 7A continuous at 48V (9A Peak current). Input Supply 240VAC
Dimensions - 112×102×55mm
Weight - 0.45Kg

Download datasheet file
 

SPS705 Stepper Motor Power Supplies
SPS series power supplies are switchable DC power supplies specifically designed for stepping & servo driver. The normal regulated switchable power supplies popular in the market are usually working with bad variability and low efficiency when used in stepping or servo driving, this is because that the conventional switching power supplies are designed for the constant, unvarying loads of circuit boards. Whereas, when the stepping or servo system running, the driving current varies extremely fast, which is belonged to inductive load, herein the driver and power supplies would be damaged easily. This supply is capable of delivering current to motor drivers without affecting the reliability due to its unregulated specialty and bulky capacitance. By selecting correct model, one supply can drag 1-3 shafts motors and so the average cost per shaft is saved.

Features

• Designed specifically for stepping/servo using
• Compact size, lightweight
• Output power 300W (continuous work)
• Short circuit, over-current & over-voltage
   

All prices are in Australian Dollars. Prices do not include GST (Goods and Services Tax). 10% GST applies to goods delivered in Australia. Australian GST is not paid on shipments despatched to an international destination. You can check the exchange rate by going to http://www.x-rates.com