 Ocean Controls PO Box 2191 Seaford BC Factory 3/24Wise Ave Seaford, Vic, Australia 3198 ABN 22 061 932 027 Ph 61 3 9782 5882 Fax 61 3 9782 5517 Email Us • Catalogue • Shopping Cart • Ordering Info • Specials • What's New • Home • Audio • Communications • Computer Products • Controllers • Counters Timers • Data Acquisition • Data Loggers • Micro Programmers • Modbus Products • Moscad RTU • Motor Controllers • Motors • Panel Meters • PLC's • Power Supplies • Relays • Sensors • Signal Conditioners • Software Commercial • Software Industrial • Test Equipment |
Small High Performance Bipolar Stepper Motors | |
|
We are now stocking a selection of high performance stepper motors. They have low coil inductance and resistance which means better performance (ie higher torque at higher speeds). Unfortunately it means higher currents and so we recommend using them with our Leadshine microstepping drives and power supplies. We ran our line of stepper motors with our drives to see what stepping rates we could achieve Check our Stepper Motor Comparison Sheet to help you select the correct motor and drives |
||
MOT-110 FL35ST36-0504B Bipolar Stepper Motor |
 |
|
MOT-115 FL39ST38-0806A Bipolar Stepper Motor |
 |
|
MOT-120 FL42STH38-1684B (Frame 17) Bipolar Stepper Motor Industrial grade small Stepper Motor, ideal for small CNC projects and robots. Has a holding torque of 3.6Kg.cm (0.35Nm or 50oz-in). Shaft at both ends Features - Step Angle 1.8deg - Voltage 2.8V - Current 1.68A - Resistance per coil 1.65Ohm - Inductance per coil 3.2 - Holding Torque 3.6Kg.cm - Step Angle Accuracy ±5% (full step, no load) - Resistance Accuracy ±10% - Inductance Accuracy ±20% - Temperature Rise 80degC Max.(rated current,2 phase on) - Ambient Temperature -20 to +50degC - Insulation Resistance 100MOhm Min. ,500VDC - Dielectric Strength 500VAC for one minute - Shaft Radial Play 0.02Max. (450 g-load) - Shaft Axial Play 0.08Max. (450 g-load) - Max. radial force 28N (20mm from the flange) - Max. axial force 10N • Dimensions: 42mm x 42mm square face, 40mm long, 31mm between mounting holes - 4 Leads - Weight: 0.3Kg • Shaft extends 20mm and 15mm from ends of the motor We recommend a M325 or M542 drive with this motor Download datasheet file |
 |
|
MOT-122 FL57STH56-2804B (Frame 23) Bipolar Stepper Motor Industrial grade small Stepper Motor, ideal for CNC projects and robots. Has a holding torque of 12.6Kg.cm (1.24Nm or 175oz-in). Shaft at both ends Features - Step Angle 1.8deg - Voltage 2.5V - Current 2.8A - Resistance per coil 0.9ohm - Inductance per coil 2.5 - Holding Torque 12.6Kg.cm - Step Angle Accuracy ±5% (full step, no load) - Resistance Accuracy ±10% - Inductance Accuracy ±20% - Temperature Rise 80degC Max.(rated current,2 phase on) - Ambient Temperature -20 to +50degC - Insulation Resistance 100MOhm Min. ,500VDC - Dielectric Strength 500VAC for one minute - Shaft Radial Play 0.02Max. (450 g-load) - Shaft Axial Play 0.08Max. (450 g-load) - Max. radial force 75N (20mm from the flange) - Max. axial force 15N • Dimensions: 56mm x 56mm square face, 56mm long, 47mm between mounting holes - 4 Leads - Weight: 0.7Kg • Shaft extends 20mm and 15mm from ends of the motor We recommend a MD542 or MD556 drive with this motor Download datasheet file |
 |
|
PURCHASING THE MOTORS All prices are in Australian Dollars. Prices do not include GST (Goods and
Services Tax). 10% GST applies to goods delivered in Australia. Australian GST is not paid
on shipments despatched to an international destination. You can check the exchange rate
by going to http://www.x-rates.com |
||
 |
||