Ocean Controls
PO Box 2191
Seaford BC
Factory 3/24Wise Ave
Seaford,
Vic, Australia 3198
ABN 22 061 932 027
Ph 61 3 9782 5882
Fax 61 3 9782 5517
Email Us
• Catalogue
• Shopping Cart
• Distributors
• Ordering Info
• Specials
• What's
New
• Home
• Audio
• Communications
• Computer
Products
• Controllers
• Counters Timers
• Data Acquisition
• Data Loggers
• Electrical
Parts
• Micro
Programmers
• Modbus Products
• Moscad RTU
• Motor
Controllers
• Motors
• Panel Meters
• PLC's
• Power Supplies
• Relays
• Sensors
• Signal
Conditioners
• Software
• Software
Industrial
• Test Equipment
• Tools
|
Large High Performance Bipolar Stepper Motors |
We are now stocking a selection of larger high performance stepper motors. They
have low coil inductance and resistance which means better performance (ie
higher torque at higher speeds). Unfortunately it means higher currents and
so we recommend using them with our Leadshine microstepping drives and power
supplies.
We ran our line of stepper
motors with our drives to see what stepping rates we could achieve
Check our Stepper Motor Comparison
Sheet to help you select the correct motor and drives
|
MOT-125 FL57STH76-2804B (Frame 23) Bipolar Stepper Motor
Industrial grade Stepper Motor, ideal for
CNC projects and robots.
Has a holding torque of 18.9Kg.cm (1.85Nm or 262oz-in).
Shaft at both ends
Features
- Step Angle 1.8deg
- Voltage 3.2V
- Current 2.8A
- Resistance per coil 1.13ohm
- Inductance per coil 3.6mH
- Holding Torque 18.9Kg.cm
- Step Angle Accuracy ±5% (full step, no
load)
- Resistance Accuracy ±10%
- Inductance Accuracy ±20%
- Temperature Rise 80degC Max.(rated
current,2 phase on)
- Ambient Temperature -20 to +50degC
- Insulation Resistance 100MOhm Min. ,500VDC
- Dielectric Strength 500VAC for one minute
- Shaft Radial Play 0.02Max. (450 g-load)
- Shaft Axial Play 0.08Max. (450 g-load)
- Max. radial force 75N (20mm from the
flange)
- Max. axial force 15N
• Dimensions: 56mm x 56mm square face,
76mm long, 47mm between mounting holes
- 4 Leads
- Weight: 1Kg
• Shaft extends 20mm and 15mm from ends of the motor
We recommend a
MD542
or MD556 drive with this motor
Download datasheet file
|
 |
MOT-105 Stepper
Motor - 57HS22
This motor is a 23 Frame motor with 4 phases which you can wire in parallel or serial provides.
It has a a holding torque of 2.2 N.m (311oz-in) and is
suitable for very heavy operation
Features
• Rated Current: 2.8A
(Series), 5.7A(Parallel)
• Phase Resistance 1.6ohm
• Phase Inductance 7.2mH
• Step angle: 1.8deg
• Ambient Temp -10 to 50degC
• Temp Rise 80degC
• Dimensions: 56mm x 56mm square face,
80mm long, 47mm between mounting
holes
• Weight: 1.2Kg
• Shaft extends 20mm from both ends of the motor
We recommend a
MD542
or MD556 drive with this motor
Download datasheet file |
 |
MOT-128 FL60STH86-2008BF Bipolar Stepper Motor
Industrial grade Stepper Motor, ideal for
CNC projects and robots.
Has a holding torque of 31Kg.cm (3.04Nm or 430oz-in).
Shaft at both ends
Features
- Step Angle 1.8deg
- Voltage 4.2V
- Current 2.8A
- Resistance per coil 1.5ohm
- Inductance per coil 6.8mH
- Holding Torque 31Kg.cm
- Step Angle Accuracy ±5% (full step, no
load)
- Resistance Accuracy ±10%
- Inductance Accuracy ±20%
- Temperature Rise 80degC Max.(rated
current,2 phase on)
- Ambient Temperature -20 to +50degC
- Insulation Resistance 100MOhm Min. ,500VDC
- Dielectric Strength 500VAC for one minute
- Shaft Radial Play 0.02Max. (450 g-load)
- Shaft Axial Play 0.08Max. (450 g-load)
- Max. radial force 75N (20mm from the
flange)
- Max. axial force 15N
• Dimensions: 60mm x 60mm square face,
88mm long, 47mm between mounting holes
- 8 Leads
- Weight: 1.4Kg
• Shaft extends 20mm and 15mm from both ends of the motor
We recommend a
MD542
or MD556 drive with this motor
Download datasheet file
|
 |
MOT-130 FL86STH80-5504B Bipolar Stepper Motor
Industrial grade Stepper Motor, ideal for
driving heavier loads.
Has a holding torque of 46Kg.cm (4.51Nm or 638oz-in).
Shaft at both ends
Features
- Step Angle 1.8deg
- Voltage 2.5V
- Current 5.5A
- Resistance per coil 0.46ohm
- Inductance per coil 4mH
- Holding Torque 46Kg.cm
- Step Angle Accuracy ±5% (full step, no
load)
- Resistance Accuracy ±10%
- Inductance Accuracy ±20%
- Temperature Rise 80degC Max.(rated
current,2 phase on)
- Ambient Temperature -20 to +50degC
- Insulation Resistance 100MOhm Min. ,500VDC
- Dielectric Strength 500VAC for one minute
- Shaft Radial Play 0.02Max. (450 g-load)
- Shaft Axial Play 0.08Max. (450 g-load)
- Max. radial force 220N (20mm from the
flange)
- Max. axial force 60N
• Dimensions: 86mm x 86mm square face,
80mm long, 69mm between mounting holes
- 4 Leads
- Weight: 2.3Kg
• Shaft extends 30mm from both ends of the motor
We recommend a
MD882
or MD556 drive with this motor
Download datasheet file
|
 |
MOT-132 FL86STH118-6004B Bipolar Stepper Motor
Industrial grade Stepper Motor, ideal for
driving heavier loads.
Has a holding torque of 87Kg.cm (8.53Nm or 1207oz-in).
Shaft at both ends
Features
- Step Angle 1.8deg
- Voltage 3.6V
- Current 6A
- Resistance per coil 0.6ohm
- Inductance per coil 6.5 mH
- Holding Torque 87Kg.cm
- Step Angle Accuracy ±5% (full step, no
load)
- Resistance Accuracy ±10%
- Inductance Accuracy ±20%
- Temperature Rise 80degC Max.(rated
current,2 phase on)
- Ambient Temperature -20 to +50degC
- Insulation Resistance 100MOhm Min. ,500VDC
- Dielectric Strength 500VAC for one minute
- Shaft Radial Play 0.02Max. (450 g-load)
- Shaft Axial Play 0.08Max. (450 g-load)
- Max. radial force 220N (20mm from the
flange)
- Max. axial force 60N
• Dimensions: 86mm x 86mm square face,
80mm long, 69mm between mounting holes
- 4 Leads
- Weight: 3.8Kg
• Shaft extends 30mm from both ends of the motor
We recommend a
MD882 drive with this motor
Download datasheet file
|
 |
PURCHASING THE MOTORS
All prices are in Australian Dollars. Prices do not include GST (Goods and
Services Tax). 10% GST applies to goods delivered in Australia. Australian GST is not paid
on shipments despatched to an international destination. You can check the exchange rate
by going to http://www.x-rates.com
|
 |
|
|
|
|
|
|
|
|