IS-D11-3M
Programmable 4-20mA meter
$99+GST
This microprocessor controlled meter can be used to display
a 4-20mA or 0-20mA signal in engineering units.
The user can set the input value, display value,
zero adjustment and the position of the decimal point. All settings all
done by switches under the front panel cover. All settings are saved to
nonvolatile memory
Download Manual
Purchase |
 |
Features
-
4 Digit LED display range -1999
to 9999
-
Accepts a 0-20mA or 4-20mA signal
-
adjustable Sampling Time 0.1 to 9.9secs.
-
Programmable decimal point position
-
Programmable scaling.
-
Signal out of range indication
-
Power required 12VDC +/-5% 0.5W or 24V
+/-5%
0.5W
-
Dimensions: 48x24x70mm.
-
Work temperature: -10ºC to+55ºC, 35 to 85% humidity.
|
RS-N-2M Tachometer/line speed meter
This meter can be used to display the RPM of a engine. It has a programmable scaling
factor which you can divide the pulse source by to correct the reading to engineering
units. For example your engine may produce 6 pulses per revolution. A scaling figure of 6
corrects the reading to show RPM.
Purchase |
 |
Features
- 4 Digit LED display 0-9999
- Accepts NPN input signals up to approx 1KHz
- adjustable Sampling Time 0.1 to 9.9secs.
- Programmable decimal point position
- Programmable scaling. Range 0.1 to 999.9
- Power required 12VDC +/5% 0.5W or 24V
+/-5%
0.5W
- Dimensions: 48x24x70mm.
- Work temperature: -10ºC to+55ºC, 35 to 85% humidity.
Purchasing
the Mini-Type Panel Meters
All prices are in Australian Dollars. Prices do not include GST (Goods and Services Tax).
10% GST applies to goods delivered in Australia. Australian GST is not paid on shipments
despatched to an international destination. You can check the
exchange rate by going to http://www.x-rates.com
|
