The N1500 LC is a universal indicator for use
with load cells. It accepts a wide variety of electric signals and is suitable for Load
Cells with 1mV/V, 2mV/V and 3mV/V output. A six-digit LED display shows measured value and
all programming parameters of the instrument.
Configuration can be entirely made through the keyboard, no circuit changes are required.
Selection of input and output types, alarms configuration, and other special functions are
accessed and programmed through the front keypad.
Standard
unit includes 4-20ma Analog Retransmission, 2 alarm relays
and RS485 Modbus connection
Price $399+GST
|
|
Features
- Input: 4-20mA, 0-20mA, 0-50mV, 0-20mV and –20 to 20mV
- 10Vcc power supply for load cells;
- Memory for maximum and minimum values
- Hold, peak hold, tare, zero tare and automatic zero functions
- 2 SPST 3Amp Alarm Relays standard
- Alarm Relays can be configured for LO, HI, differential, diff. LO, diff. HI and sensor
break
- A Process Variable (PV) retransmission in 0-20mA or 4-20mA comes as standard
- Internal resolution: 128000 levels
- Display resolution: 62000 levels (-31000 to 31000)
- Sampling rate: 15 samples per second.
- Maximum error: 0.15% of the maximum range
- PV retransmission resolution: 4000 levels, max. 550W.
- Working temperature: 0 to 55°C, humidity 35 to 85%
- Protection rate Front panel: IP65
Rear panel: IP30
- Dimensions: 48×96×92mm.
Download the Flier Information Sheet
Download the Instructions Manual and
Specification Sheet
The N1500LC Load Cell Indicator is available in 2 forms. Each of the forms have all the
features listed above
The different forms are
- 24VDC/24VAC powered
- 85-264VAC powered
4 Alarm Relays is optional
Purchasing
the N1500LC Process Meters
All prices are in Australian Dollars. Prices do not include GST (Goods and Services Tax).
10% GST applies to goods delivered in Australia. Australian GST is not paid on shipments
despatched to an international destination. You can check the
exchange rate by going to http://www.x-rates.com
|
|
