ocontrol_surf4.jpg (4320 bytes)
Ocean Controls
PO Box 2191
Seaford BC
Factory 3/24Wise Ave

Seaford,
Vic, Australia 3198
ABN 22 061 932 027

Ph 61 3 9782 5882
Fax 61 3 9782 5517

Email Us


• Catalogue
• Shopping Cart
• Distributors
• Ordering Info
• Specials
• What's New
• Home
• Audio
• Communications
• Computer Products
• Controllers
• Counters Timers
• Data Acquisition
• Data Loggers
• Electrical Parts
• Micro Programmers 
• Modbus Products
• Moscad RTU
• Motor Controllers
• Motors
• Panel Meters
• PLC's
• Power Supplies
• Relays
• Sensors
• Signal Conditioners
• Software
• 
Software Industrial
• Test Equipment
• Tools





   


Protocol Gateway
Allows you to connect two different PLCs together or a PLC to a Modbus Network


Function
GWY-00 is a Protocol Converter / Data sharer for devices like PLCs, Inverters, Controllers etc. The gateway has two serial ports that connect with two different devices. The gateway communicates with a device to get the information required by the other device.

Our Windows® based Gateway setup software makes it easy to configure the protocol converter. After choosing which protocol to use for each port, you program the Gateway to transfer the
data blocks. Using a simple spreadsheet format, you simply program the Gateway to fetch a specified number of registers or bits from one device and transfer them to the other. Powerful
software allows you to have all of the information transfers done continuously or allows the PLC to control which block of data is to be transferred.
A serial PC Programming Cable for the Gateway is available. Do Not use a normal straight through cable.
 



Purchase

Features include
 - DIN Rail or Panel Mounted compact Protocol Converter
 - DB9 Serial ports in any combination of RS232 / RS422 / 2 or 4 wire RS485 / CMOS
 - Connects PLC to PLC or PLC to a Modbus Network (as a Master or Slave)
 - Allows data sharing between PLC, Invertors, Controllers and other network devices
 - Common model for connecting different devices. Several PLC an Invertors supported
 - Direct connection to the Programming terminal saves additional hardware
 - Low power consumption of only 2.5 Watts
 - Common Programming software for the entire Gateway family.........FREE!!
 - CE / CSA with UL certification
 

 General Specifications
Power + 24VDC ± 10%, 100mA max
Communication Ports
 
2 communication ports with RS232 / RS422 / RS485 / CMOS (Isolation between communication ports and Power supply, through DC-DC coupler is 1 KV)
PLC1

PLC2
Connects to PC for setup download or connetcs to PLC1 at runtime

Connects to PC for setup download or connetcs to PLC1 at runtime

Connects to PLC2
 

Operating Temp. 0º to 60º C
Storage Temp. -20º to 80º C
Humidity 10% to 90% (Non Condensing)
Mounting DIN rail or back panel mounting
Dimensions 105(L) X 40(D) X 51(W) mm
Weight 125g Approximately.
 
 

Download Information Sheet


PURCHASING THE GATEWAY
All prices are in Australian Dollars. Prices do not include GST (Goods and Services Tax). 10% GST applies to goods delivered in Australia. Australian GST is not paid on shipments despatched to an international destination. You can check the exchange rate by going to http://www.x-rates.com

Item Description Quantity Price(AUD$)
GWY-001 Serial Gateway $336.00
PMX-010 PC Programming Cable for Gateway $25.00