 Ocean Controls PO Box 2191 Seaford BC Factory 3/24Wise Ave Seaford, Vic, Australia 3198 ABN 22 061 932 027 Ph 61 3 9782 5882 Fax 61 3 9782 5517 Email Us • Catalogue • Shopping Cart • Ordering Info • Specials • What's New • Home • Audio • Communications • Computer Products • Controllers • Counters Timers • Data Acquisition • Data Loggers • Micro Programmers • Modbus Products • Moscad RTU • Motor Controllers • Motors • Panel Meters • PLC's • Power Supplies • Relays • Sensors • Signal Conditioners • Software Commercial • Software Industrial • Test Equipment |
Conch Solid State Relays | |
|
SSR-100 Solid State Relay
SS-240DA 40A @240VAC The SS-240DA Solid State Relay from Conch is a panel mounting solid state relay that offers 4-32VDC input control, with the output rated at 40Amps @ 240VAC. It provides 4000Vms opto-isolation between input and output. Comes with cover to minimize contact with live voltages (see picture) Specifications: Input Circuit - Control Voltage Range: 4- 32VDC - Control Current: 6 to 10mA - Pick Up voltage: 4V DC - Drop Out Voltage: 2VDC Output Circuit - Isolation strength: >100MOhm - Nominal Line Voltage: 240V AC - Load Voltage Range: 24- 280V AC - Min. Blocking Voltage: 600V AC - Max one- cycle surge current: 400A - Operating/Storage Temperature: -20 to 80degC/-40 to 100degC - Dimensions:57(L) x 45(W) x30(H)mm Download Datasheet Purchase! |
 |
|
|
SSR-110 Solid State Relay
SS-240AA 40A @240VAC The SS-240AA Solid State Relay from Conch is a panel mounting solid state relay that offers 80-280VAC input control, with the output rated at 40Amps @ 240VAC. It provides 4000Vms opto-isolation between input and output. Comes with cover to minimize contact with live voltages (see picture) Specifications: Input Circuit - Control Voltage Range: 80-280Vac - Control Current: 10mA/110Vac - Pick Up voltage: 60V AC - Drop Out Voltage: 40VAC Output Circuit - Isolation strength: >100MOhm - Nominal Line Voltage: 240V AC - Load Voltage Range: 24- 280V AC - Min. Blocking Voltage: 600V AC - Max one- cycle surge current: 400A - Operating/Storage Temperature: -20 to 80degC/-40 to 100degC - Dimensions:57(L) x 45(W) x30(H)mm Download Datasheet Purchase! |
|
|
|
SSR-120 Solid State Relay
SS-110DD 10A @60VDC The SS-110DD Solid State Relay from Conch is a panel mounting solid state relay that offers 4-32VDC input control, with the output rated at 10Amps @ 60VDC. It provides 4000Vms opto-isolation between input and output. Comes with cover to minimize contact with live voltages (see picture) Specifications: Input Circuit - Control Voltage Range: 4-32Vdc - Control Current: 6-10mA - Pick Up voltage: 4V dc - Drop Out Voltage: 2 V dc Output Circuit - Isolation strength: >100MOhm - Load Voltage Range: 5-60V DC - Non rep. peak voltage: 150Vp - Leakage current <1mA - Operating/Storage Temperature: -20 to 80degC/-40 to 100degC - Dimensions:57(L) x 45(W) x30(H)mm Download Datasheet Purchase! |
|
|
|
SSR-125 Solid State Relay
SS-240VA 40A @240VAC Potientometer Control The SS-240VA Solid State Relay from Conch is a panel mounting solid state relay that allows a 500KOhm potentiometer to be connected across the input. The position of the potentiometer results in Phase Trigger Control of the Load. If the potentiometer is set at 10% then 10% of the cycle is passed. (Warning there is no isolation between the input and output. There is 240VAC across the potentiometer inputs. The potentiometer must be rated to the load voltage), with outputs rated at 40Amps @ 240VAC. The breakdown voltage is rated at 2500Vrms. Comes with cover to minimize contact with live voltages (see picture) Specifications: Input Circuit - Potentiometer Resistor 500KOhm for 240VAC Output Circuit - Load Voltage Range: 80-280V AC - Non rep. peak voltage: 600Vp - Leakage current 8mA - 1 Cycle Surge Current 400A - Operating/Storage Temperature: -20 to 80degC/-40 to 100degC - Dimensions:57(L) x 45(W) x30(H)mm Download Datasheet Purchase! |
|
|
|
SSR-130 Solid State Relay
SS-240CA 40A @240VAC 4-20mA Control The SS-240CA Solid State Relay from Conch is a panel mounting solid state relay that allows a 4-20mA signal to be connected across the input. The level of the 4-20mA signal results in Phase Trigger Control of the Load. A curve is provided on the datasheet showing the relationship between the input current and the Output Percentage load. The load output is rated at 40Amps @ 240VAC. It provides 4000Vms opto-isolation between input and output. A cover to minimize contact with live voltages is included (see picture) Specifications: Input Circuit - Input Control Range 4-20mA Output Circuit - Load Voltage Range: 90-260V AC - Non rep. peak voltage: 600Vp - Leakage current 8mA - 1 Cycle Surge Current 400A - Operating/Storage Temperature: -20 to 80degC/-40 to 100degC - Dimensions:57(L) x 45(W) x30(H)mm - DIN Rail Mount Heat Sink included. Download Datasheet Purchase! |
 |
|
|
SSR-020 Heatsinks for Solid State Relays These heatsinks are designed for mounting the solid state relays on them. They are manufactured from solid black aluminium and come in lengths of 50mm (fits 1 relay) and 100mm (fits 2 Solid State Relays). The screw holes for the solid state relays are 4mm. The heatsinks are suitable to used with an 80mm Fan mounted at the heatsink end. Purchase! |
  |
|
|
SSR-030 DIN Rail Mount Heatsinks for Solid State Relays These heatsinks are designed for mounting the 40A 250VAC and SSR-013 solid state relays on them. They are manufactured from solid aluminium and come in height of 40mm and 60mm and a length of 100mm (fits 1 relay). The screw holes for the solid state relays are 4mm. The heatsinks are suitable to be used with an 80mm fan mounted at the heatsink end.
|
|
|
PURCHASING THE SOLID STATE RELAYS |
||
|
|
||
