ocontrol_surf8.jpg (2920 bytes)
Ocean Controls
PO Box 2191
Seaford BC
Factory 3/24Wise Ave

Seaford,
Vic, Australia 3198
ABN 22 061 932 027

Ph 61 3 9782 5882
Fax 61 3 9782 5517

Email Us


• Catalogue
• Shopping Cart
• Ordering Info
• Specials
• What's New
• Home
• Audio
• Communications
• Computer Products
• Controllers
• Counters Timers
• Data Acquisition
• Data Loggers
• Micro Programmers 
• Modbus Products
• Moscad RTU
• Motor Controllers
• Motors
• Panel Meters
• PLC's
• Power Supplies
• Relays
• Sensors
• Signal Conditioners
• Software Commercial
• 
Software Industrial
• Test Equipment


   
Frequency to Analog Card

Frequency to Analog Card

Our frequency to analog converter allows you to convert the frequency of a pulse stream to an analog  0 to 5V voltage signal or 4-20mA current signal.
The converter has a RS232 serial port 9600 baud which allows you to configure the converter card and read the frequency using the popular Modbus protocol. The configuration is automatically saved to EEPROM
Two on board relays can be used as alarm contacts if the frequency rises above or falls below set limits
Frequency range is 5 to 10KHz or 5 to 65000RPM.
The pulse stream can be 0 to 5V signal or a NPN signal.
The converter can be DIN rail mounted.

 




Features
  • Modbus RTU Slave. Address can be set.
  • Frequency range is 5 to 10KHz or 5 to 65000RPM
  • The pulse stream can be 0 to 5V signal or a NPN signal.
  • 12 bit Analog output. 4-20mA or 0-10VDC output
  • Frequency can be read
  • Two relay outputs with Normally open and closed contacts.
    can be set as alarms if frequency above or below set limits
  • relay outputs can switch 5A@240VAC
  • 12 to 15VDC powered.
  • Communication via RS232 or RS485.
  • DIN Rail Mount Option
  • All external connections are via screw terminals.



Download the manual


Measures 107(L) x 87(W) x 24(H)mm
 


 


PURCHASING THE Frequency to Analog Converter CARD
All prices are in Australian Dollars. Prices do not include GST (Goods and Services Tax). 10% GST applies to goods delivered in Australia. Australian GST is not paid on shipments despatched to an international destination. You can check the exchange rate by going to http://www.x-rates.com
Item Description Quantity Price(AUD$)
KTA-214 Modbus I/O Card with 0-5V Analog Output $114.50
KTD-214 Modbus I/O Card with 0-5V AO DIN Rail $139.00
KTA-215 Modbus I/O Card with 4-20mA Analog Output $114.50
KTD-215 Modbus I/O Card with 4-20mA AO DIN Rail $139.00





View Your Shopping Cart