|
We are
clearing out a number of products. If you wish to order these you will
have to ring up and order them over the phone. Once we sell out of
these items we will no longer be stocking them
ph 03 9782
5882.
|
Audiowave Software Version 2 - $25.00
With
AudioWave 2.0 your soundcard becomes a comfortable LF-signal-generator,
which produces signals from 1Hz to 20 kHz with a resolution of 1 Hz.
Phase shift between left and right channel is adjustable from –180° to
+180° and an attenuator can be used for steps of 0dB, -3dB, -6dB, -10
dB, -20 dB, -30dB. Frequency, level and attenuation can be adjusted
independently for left and right channel and optionally left and right
channel can be chained. AudioWave produces sine and noise signals, as
well as modulated signals. Automatic frequency and level progress is
programmable. Complex adjustment can be stored as presets with clear
names.
Click here
for more information
| 
|
Arduino Lilypad USB Link - $17.33
This
is a USB to UART board that allows easy reprogramming of the LilyPad
main board without the need for soldering. This board is based on the
FT232RL IC from FTDI.
|  |
Arduino Lilypad Components
These components help you get started with LilyPads.
Includes:
* LilyPad Tri-Color LED $9
* LilyPad Light Sensor $9
* LilyPad Buzzer $9.67
* LilyPad Vibe Board $17.33
* LilyPad Temperature Sensor $7.00
|  |
Arduino Lilypad - $24.67
This
is LilyPad Arduino - the main board consisting of an ATmega168V with
the Arduino bootloader and a minimum number of external components to
keep it as small (and as simple) as possible. Board will run from 2V to
5V.
|  |
Arduino Skinny - $22
SparkFun's
minimal design approach to Arduino. This is a 3.3V Arduino running the
8MHz bootloader (select 'LilyPad' within the Arduino software). The
Skinny is not a fully certified Arduino board. We're working with
Arduino.cc wards certification. Future revisions will have multiple
improvements. This board does not work with the 5V Arduino shields but
does work nicely with the prototyping shield.
|  |
SOM96 Serial Controller
- $49
The
SOM96 Serial Output Module is designed to be used with IBM PCs and
compatibles. Each module has 4 independent single pole changeover
relays which can be independently addressed from the PC. The standard
RS232 serial output is converted to RS485 by the first module and this
is used to drive subsequent modules. Each module may be allocated one
of 256 addresses, thus allowing for control of 1024 relays.
Click here for more
information
|
 |
DIN
Rail 4PDT Relays
- $12.50
These 4 pole double throw relays are able to switch 10 amps at 240VAC.
They include a LED to indicate switch and a push to test button. Price includes the DIN Rail Base
Available
with 24VDC and 24VAC coils
Click here for more information
|
 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
